Power System, mainly includes following things:

  1. Power Generation
  2. Power Transmission & Distribution

Basic Components of a Power Transmission System are as follows:

  1. Substation
  2. Power Lines/Cables

Basic Components of a Substation are as follows:

Similar Posts

Duty cycle of Circuit Breaker
| |

What is the Duty Cycle/Operating Sequence of Circuit Breaker specified on the Name Plate

ByPranali N

[We keep wondering what the heck this sequence on the name plate of the Circuit Breakaer. Lets find it out now. What is the Duty Cycle/ Operating Sequence of CB? It is the Mechanical Duty requirement to be fulfilled by the  Operating Mechanism of the Breaker and specified on the Name Plate of the Breaker…

| |

Transformer Insulation Explained !

ByPranali N

What are different types of Insulations used in Transformer? There  are two types of Insulations used in Transformers:  1) Oil  2) Solid Insulation What are the Functions of Transformer Oil ? Transformer Oil has mainly three Functions:   1) Insulation  2) Cooling 3) Also, there is contamination caused by Chemical Interactions with Windings and other…

|

Buchholz Relay in Transformer

ByPranali N

Bucholz Relay provides Mechanical Protection for Transformer. What is a Buchholz Relay? What is the Working Principle of Buchholz Relay? 1.Accumulation Of Gases: Whenever a fault occurs inside the transformer, such as Arcing, Partial Discharge, Insulation failure of turns, breakdown of core or excess core heating, the fault is accompanied by production of excess heat….

tnc switch
|

TNC Switch Working, Application and Connection Diagram

ByPranali N

TNC Switch is used in the RP/CP (Remote TNC Switch) and in the Breaker (Local TNC Switch) for Tripping and Closing the Breaker Manually. What is a TNC Switch? It is a Three Position Switch, used for Closing or tripping the Breaker Manually from Control Panel/Relay Panel in the Control Room.  The Three Positions are…